DIN 50018-2013

DIN 50018 含二氧化硫環境的冷凝水交變環境試驗

DIN 50018-2013發行信息

標準號DIN 50018-2013

中文名 在含二氧化硫氣體的冷凝水中變換氣候的試驗

英文名 Testing in a saturated atmosphere in the presence of sulfur dioxide

發布日期2013-05

實施日期

廢止日期無

中國標準分類號H25

國際標準分類號25.220.99;77.060

發布單位DE-DIN

被代替標準DIN 50018-1997 DIN 50018-2012

DIN 50018-2013適用范圍

This standard mainly covers performance checks carried out on test arrangements used to assess anti-corrosion systems. Users of this standard are also requested to consult other relevant standards and regulations and are advised that individual test conditions may be also agreed upon on a case by case basis. As it cannot be ruled out that specimens, on which different anti-corrosion systems have been applied, may interact, it is recommended that different anti-corrosion systems be tested separately. If various anti-corrosion systems applied to different test materials are to be tested together, it should be taken into account that the sulfur dioxide tends to have diverse effects on the materials under test and that results are, therefore, not always reproducible. Unless the anti-corrosion systems compared are similar to one another, it may be difficult to draw reliable conclusions with regard to their effectiveness under service conditions. In the same way that corrosive test conditions differ considerably from those occurring in service, so do the levels of protection afforded by anti-corrosion systems.

本標準主要涵蓋對用于評估防腐系統的試驗安排進行的性能檢查。本標準的使用者還應參考其他相關標準和法規，并建議根據具體情況商定單獨的試驗條件。由于不能排除已應用不同防腐系統的試樣可能相互作用，因此建議單獨測試不同的防腐系統。如果對不同試驗材料使用的各種防腐系統要一起進行試驗，則應考慮到二氧化硫往往對試驗材料產生不同的影響，因此，結果并不總是可再現的。除非所比較的防腐系統彼此相似，否則可能難以就其在使用條件下的有效性得出可靠結論。腐蝕性試驗條件與使用中的腐蝕性試驗條件有很大不同，同樣，防腐系統提供的防護等級也有很大差異。